Best Prowler Trolling Motor and How to Use It

The best Prowler trolling motor is undauntedly the Bass Pro Shops Prowler. Whether you prefer the bow-mounted or transom-mounted version of trolling motors, this quality product will never fail you in your fishing charter. Both Bass Pro trolling motor versions are 12 volt, which is one of the reasons experienced anglers chose them. You can use trolling motors to navigate shorelines or adjust your drift. You’ll hardly run long enough or rough enough to drain the battery. Moreover, these motors are made by Motor Guide for Bass Pro Shops, making them very affordable.

Bass Pro Shops Prowler TSW55/36B Saltwater Trolling Motor, Transom Mount

Bass Pro Shops Prowler 55/36 trolling motors are very powerful and can do 55 pounds of thrust. These motors are also very portable and come with a shaft that is 36′′ long. Bass Pro Shops Prowler TSW55/36B Saltwater Trolling Motor is powered by a 12 volt motor. You can use it on a 14′ Alumacraft Jon boat for river fishing charters for jacks, snook, and bass. It works fine, and the battery will last all day or all night.

You can also mount it to the transom of heavier boats such as a 20′ Key West Bay Reef. The engine is potent and moves the boat very well. It worked very well, even if you have a very heavy boat. You can even use it to stop the boat from drifting when the wind or the current is really strong. With this trolling motor, you can use your boat to do a lot of beach fishing for tarpon and other fish species. It moves the boat around quite well and has a volt meter, which is very convenient.

21rgbUpKNKL. AC

Pros

Many anglers find this motor to be a great unit for the price. It is as good as all the other saltwater trolling motors you can find on the market. It is relatively durable and reliable. The tilting function on this motor is much better than the tilting mechanism on the Motor Guide. It runs fairly well and is easy to operate; the battery indicator is nice, and the handle extends handy. It is as good or even better than the other trolling motors from Motor Guide and Minn Kota.

Cons

There are some negative aspects to this motor. The bolts that secure the motor to the shaft do not grip tightly. Some of the hardware and bolts may rust due to exposure to saltwater. Also, it is important to rinse it in clean water thoroughly and to lubricate the bolts and other hardware that come with the motor. This is true even on large screws. They will rust and seize up if it is not done. It is crucial to always lubricate and rinse the parts and hardware before use because they will rust and seize up when not lubricated.

The collar that adjusts the depth of the water reservoir does not slide as smoothly as it should. Also, the rubber bushing on the shaft sort of walks out of the bore. It is annoying to have to re-insert them once the shaft is finished. It is not a big deal, just a nuisance to put them back in.

Bass Pro Shops Prowler SWB55/50B Trolling Motor, Bow Mount

The Bass Pro Shops 55/50 Bow Mounted Prowler trolling motor is equally great. They are very good quality and work great on bay boats, whether a 20-foot Key West or one 22-foot Stott Craft. The Key West is heavier, but the Stott Craft is smaller and slower. The trolling motor comes with a 12-volt motor that puts out 55 pounds of thrust and has a 50-inch shaft. This trolling motor is undoubtedly a decent unit and has outstanding value.

21NqqVFujIL. AC

Pros

The first thing that stands out with this motor is the price. It is a bargain for a saltwater trolling motor and works well. This motor is sufficient for what many anglers need, especially if you don’t do a lot of runs. However, anglers who run it all day when there is wind and current will need a motor that is 24 or 36 volts. It deploys very well and is quite reliable. It comes with a convenient volt meter and an extendable handle on the side of the unit. The breakaway bracket on this motor works very well, and it is adjustable. You’ll like the latch and door on the front to allow you to take the motor off your boat easily.

Cons

The brackets, hardware and shaft can begin to corrode sooner than you thought. Anglers should periodically loosen and lubricate the bolts for adjusting the breakaway bracket and the “latch and door. It appears that the shaft length is not necessary for boats with plenty of room for an inboard thrust motor. It is likely that the engine that produces 55-pound thrust may not be suitable for a larger boat.

How Do You Use a Trolling Motor?

Most fishing boats, including bass boats, are equipped with electric trolling motors. There are many different types of motors that you can install on different types of fishing boats. Many people add them to their fishing boats to allow them to move more efficiently. Even though we all say that trolling motors are great, they’re actually used more often to maneuver and position a boat than they are for trolling.

When you turn on an electric trolling motor, you’ll hear it click as you turn the tiller handle, so you know when you’re moving through which settings. To understand how a trolling motor works, it’s important to start with a basic overview of the features.

Grab the tiller and turn it clockwise to increase the speed of the motor, or turn it counter-clockwise to slow it down. Turn the tiller handle counter-clockwise, away from the starting point, to reverse. Some electric trolling motors have a number of different speeds, and you can feel the button on the tiller handle click as you adjust the speeds.

Here is a quick video to show you what I mean:

Tips for Using a Trolling Motor

There are a few things you can do with any kind of trolling motor that will prove useful. If your boat constantly bobs up and down on big waves, use the lower motor to go deeper into the water. Most trolling motors have a set-screw that lets you slide a rod through the mount to increase or decrease the depth to which you can go.

When you fish in shallow areas, and if you have a lot of weeds, it’s very common for the propellers on your trolling motor to become fouled. If your boat is sluggish or you hear vibrations from the trolling motor, try turning the engine on and running it in reverse. If that doesn’t work, try tilting the motor up and cleaning off the propeller. Always remember to tilt your bow-mounted trolling motor when approaching a boat ramp, or the propeller could damage the concrete.

If you have a transom-mounted trolling motor that you want to use to keep your boat in a straight line even if the wind is blowing hard, it’s easier to turn around and put the trolling motor in reverse and hold the stern up against the wind. If you turn around and sit down in the water with the bow facing downwind, it will stay straight, and you won’t have to force yourself to turn around and drive against the current.

If you often run out of battery power before you have finished fishing, try running the motor at a slower speed. Top speeds are often the least efficient, and running the motor at only three-quarters or half-throttle can significantly affect how much time it takes to run the motor.

Types of Trolling Motors

Here are the different types of motors and why you’d choose one over the other:

1. Bow Mounted Trolling Motors

Bow-mounted motors are not usually used for trolling but rather for quietly maneuvering a boat in and around fishing hotspots. With the thrust located in the bow, it’s much easier to keep the boat steady and pointed straight into the wind or the current when you’re casting to fishing hotspots. These rigs are most commonly found on bass boats and bay boats, and a few boats utilize a tiller to steer the boat, but far more boats are controlled with a foot pedal or digitally.

It depends on your control system, but basically, it just boils down to applying some thrust to hold the boat steady.

  • Creep slowly along the shoreline as you cast to it
  • Control its drift;
  • Power it from one hotspot to the next

Since trolling motors can only move a few MPH if a hotspot is about a hundred yards away or more, most anglers will pull the motor up and out of the water using a pull-chord and then use a gas outboard to move.

2. Transom Mounted Trolling Motors

Transom-mounted trolling motors are attached to the stern of the boat with special clamps that allow you to move the boat without propulsion. They work well if you’re actually trolling, and your goal is to move the boat at a speed of one to three MPH so you can properly display your lures or baits. Transom-mounted electric trolling motors can be used as the primary motor for your boat.

Small Jon boats and dinghies can sail just fine with just a small engine; in areas where there are no restrictions on gas motors, a transom-mounted trolling motor is the only option. These motors are a bit different from bow-mounted motors in that they usually have steering controls that can be operated from a separate steering wheel. We’ll get into that in a minute.

Some boats react differently to wind and currents than they would do with a bow-mounted motor. In fact, it may be necessary to counter-steer the boat with an electric motor that you have mounted on the transom. Those thrusters are located on the stern of the boat, so it’s easier for the wind and current to force the boat off-course. Sometimes it may be necessary to counter-steer the boat more than with a bow-mounted engine, especially when a stiff breeze is blowing across the water and trying to cause the boat’s bow to turn.

3. Tiller Steer Trolling Motors

Tiller steer trolling motors are basically like those which drive small gasoline outboard motors. Move the tiller to one side to increase or decrease the speed of the motor. Grab the tiller and turn it clockwise to increase or decrease the speed of your engine. If you turn the tiller counter-clockwise, it will cause your engine to run at a slower speed.

When you pull the tiller, it starts to turn counter-clockwise, so you can go to reverse. Some electric trolling motors allow you to adjust the speed of your motor by pressing a few buttons on the tiller, or you may feel it clicking on your hand as you go through each setting.

Some electric trolling motors have many different speed settings, which means that rather than clicking to set specific power outputs, every little bit of control you exert will cause the motor to turn smoothly and gradually.

Using a tiller steer trolling motor means that when you press the tiller to the left, the boat’s bow swings to the right; when you push it to the right, the bow swings to the left. Many people find that using a tiller steer trolling motor can be confusing; they struggle to understand how to use the controls on the tiller steer motor. However, most boaters quickly become accustomed to using tillers. Using them to move a boat around by pushing a handle to either side allows you to rapidly change course or instantly maneuver a boat than if you were steering a boat with a steering wheel.

One thing to remember when using a tiller trolling motor is that it’s quite different from lifting other types of trolling motors out of the water. Many bow-mount electric motors use different types of controls, and a pull-chord often lets you swing the motor up or down. Some tiller steer motors require you to hold a button or a lever with one hand while you slowly swing the motor around with the other hand.

4. Foot Pedal Controlled Trolling Motors

Foot pedal motors are very popular with bass fishermen, because they allow them to cast and reel even while they are maneuvering the boat. It is quite simple to use, and most people get the hang of it in one or two fishing sessions. Different brands and models have different ways that they work.

In some models, you move the pedal forward or backwards to turn the engine on or off. Others allow you to drive faster or slower. Apply more or less pressure to change your speed or go slower. Some models have buttons on the left and right of the pedal that you can depress to cause the engine to go faster or slower.

5. Digitally Controlled Trolling Motors

Some of the smartest trolling motors on the market can be controlled by modern tech. So you can use a simple remote that hangs from a cable that you put around your neck to control your motor, and you can even use the left and right arrows to steer the motor and to move forward and reverse arrows to force it to move forward and forward.

Some motors allow you to control their controls via an app, which allows you to use your phone as a remote control. And they can be controlled remotely via Bluetooth or WiFi, just like your other electronic equipment. The motor controls are shown on your multifunction display at the top of your boat.

Some of the latest trolling motors are quite sophisticated, and as a result, they offer some really impressive features. Some models feature an autopilot that allows you to slowly navigate along a specific route or set up a series of waypoints to help you navigate. Some models have an internal GPS, and by simply pressing a button, they can sense the exact location and apply the right power and steering necessary to hover the boat in place — in other words, they do virtual anchoring! Others are highly advanced and can be deployed and raised from the water at the touch of a button or a touchpad.

How to Choose the Right Trolling Motor for Your Boat

There are many types of trolling motors available, and learning how to use one can be very different from learning another motor. If you’re unsure which trolling motor to use or how much power it should have, feel free to post a question to our skilled captain in the comment box below.

FAQs

What brand is the Prowler trolling motor?

Snooze away while you’re fishing quietly with the Bass Pro Shops® Prowler® T55/40 Trolling Motor. It can deliver 55 lbs. of thrust, five forward and three reverse speeds for easy control. Moreover, the Prowler is equipped with a 3-blade prop and a 40-inch stainless steel shaft.

Who makes Bass Pro Shops prowler trolling motor?

The Prowler is designed to be all-weather and has a handle that can be extended. The Prowler also has five forward and three reverse speeds, an LED light that provides easy access to the tools and a power indicator. Motor Guide manufactures Bass Pro trolling motors; manufacturer model number: T30/30D.

What size trolling motor do I need?

It is very important to consider the weight of your boat when choosing a trolling motor. For every 100lbs of weight, you want at least 2 lbs of thrust. If you have a 3000lb boat with all the gear, you will need to buy a motor that can produce at least 2lbs of thrust for every 100lbs of weight.

How much does a Prowler trolling motor cost?

At less than $500, a prowler trolling motor is undoubtedly a bargain for a saltwater trolling motor.

How fast can you go with a 55 lb thrust trolling motor?

When using the best fuel, i.e. distillate marine diesel, and when using a 55-pound trolling motor that can carry a moderate load, the maximum speed that 55-pound motors are capable of is only 5 miles per hour. In this case, it would take around 2 hours for the deep cycle battery to deplete completely.

Leave a Comment

%d bloggers like this: